Stephen Peek | Peek Helicopters | Peek Fireworks | Peek House | Model Jet Club
8 LED Chaser pre-programmed
Module uses PWM (pulse width modulation) to achieve various light levels and fade effects for 8 Yellow LEDs although the board supports Multi Coloured LEDs. These boards are fully assembled and tested. The patterns are pre-programmed and are controlled from the control button. Selected pattern and mode are retained after power off.
|
Power: |
Operable from 3v to 12v |
|
» Operation time: |
300+ hours from (4) AAA battery pack. 150+ hours from 9v battery pack. |
|
» Auto Power-Shutdown: |
15 minutes. (Can be disabled at will) |
|
» Dimensions: |
° PCB: L,W,H = 60 mm, 25 mm, 7 mm (2.63 in,
0.98 in, 0.28 in)
|
|
» Single button control:
|
° Tap for pattern. ° Hold for .5 second to power off. ° Hold for 1 second to toggle Repeat/Cycle Mode. ° Hold for 1.5 seconds to toggle Bright/Dim Mode. ° Hold for 2.0 seconds to Enable/Disable Auto Power-Shutdown. ° Double tap any time to switch between Speeds 1 to 9. |
8 LED Chaser with Control Software
6x6 LED Matrix with Control Software
